feedback
facebook page
Follow Me on Pinterest
twitter page
google plus page
rss feed

Recalled Product

List of recalls for Altec At235

Search Recalls or Browse by Category
Consumer Products (?)
Food & Health (?)
Vehicles (?)

Altec At235 Recalls

There have been 4 recalls on At235 vehicles in recent years. The latest, dated 2013-10-21 and published by the NHTSA on 2013-11-07, was due to a problem with the exhaust system. Approximately 1145 vehicles were involved. Since 2006, At235's have experienced approximately 4 recall(s) due to hazards with various components, including the cables, torsion bar. See a list of recalls for your model year below.

IMPORTANT NOTE: Also check the list of Additional Altec Models to the right. At times, the manufacturer or the NHTSA may use slightly different model names, or group models together by series.

Recalled Altec At235 vehicles

Do you work for Altec? Contact us to learn how you can control data, information and ads shown on this page.

Detailed Recall Information for Altec At235

Show Recalls for Model Year:
All
2006
2007
2008
2010
2011
2012
2013
2013-10-21 (Published by NHTSA on 2013-11-07)
Recall Summary: Altec Industries, Inc. (Altec) is recalling certain model year 2010-2013 AT200A, AT235, AT235P, AT30-G, AT35-G, AT37-G, AT40-G and AT237 Aerial Devices mounted on Ford Super Duty Chassis' equipped with 6.8L gas engines and Muncie FR67 power take offs (PTO). In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
Hazard: Oil leaking onto the thermal blanket combined with heat from exhaust may result in an increased risk of fire.
Remedy: Altec will notify owners, and dealers will replace the affected pressure switch and thermal blanket with the kit identified by Muncie, free of charge. The recall is expected to begin in early November 2013. Owner's may contact Altec at 1-877-462-5832. Altec's recall number is CSN 583.
Additional Info: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
NHTSA Source: http://www-odi.nhtsa.dot.gov/recalls/recallresults.cfm?start=1&SearchType=QuickSearch&rcl_ID=13V458000
   
2013-05-29 (Published by NHTSA on 2013-06-08)
Recall Summary: Altec Industries, Inc. is recalling certain model year 2010-2012 AT200A, AT235/235P, AT237, AT248F, AT35/37-G, and AT40-G aerial devices built on Ford F550 chassis with a gross vehicle weight rating of 19,500lbs. The battery cable going to the unit auxiliary functions could be damaged and possibly short to ground.
Hazard: If the battery cable shorts to ground, it may overheat, resulting in a fire.
Remedy: Altec began notifying affected owners on April 24, 2013. Dealers will re-route the auxiliary function battery cables. Owners may contact Altec at 1-800-860-0183. Altec's recall number is CSN 565.
Additional Info: Customers may contact the National Highway Traffic Safety Administration's Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov.
NHTSA Source: http://www-odi.nhtsa.dot.gov/recalls/recallresults.cfm?start=1&SearchType=QuickSearch&rcl_ID=13V224000
   
2012-08-09 (Published by NHTSA on 2012-08-09)
Recall Summary: Altec Industries, Inc. is recalling certain model year 2012 Aerial Device vehicles built on a Navistar Terrastar chassis because the Altec-installed torsion bar increases the ride height of the front suspension, which when the vehicle hits bumps, may cause the vehicle to alter its steering direction.
Hazard: As the vehicle hits bumps, it may deviate from the intended line of travel, increasing the risk of a crash.
Remedy: Altec will notify owners, and will install an updated bracket and spring kit, free of charge. The safety recall began on August 27, 2012. Owners may contact Altec Industries at 1-877-462-5832.
Additional Info: Altec's recall campaign number is CSN 560.Customers may contact the National Highway Traffic Safety Administration's Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov.
NHTSA Source: http://www-odi.nhtsa.dot.gov/recalls/recallresults.cfm?start=1&SearchType=QuickSearch&rcl_ID=12V390000
   
2010-09-10 (Published by NHTSA on 2010-09-10)
Recall Summary: ALTEC IS RECALLING CERTAIN MODEL YEAR 2006-2007 AT200A, AT235, MODEL YEAR 2007-2010 AT235P AND MODEL YEAR 2008 AT3XG TRUCKS BUILT ON GM CHASSIS. THERE IS A POTENTIAL HYDRAULIC HOSE ROUTING CONDITION IN THE ENGINE COMPARTMENT. THE HOSE COULD CONTACT AND CAUSE SOME ABRASIONS TO AN OEM 12V CHASSIS WIRE OR POSSIBLY RUB ON THE STEEL POWER STEERING LINE WHICH MAY LEAD TO POSSIBLE DAMAGE OF THE HYDRAULIC LINE.
Hazard: THIS COULD RESULT IN A BURST HYDRAULIC HOSE DAMAGE WIRING, OR A FIRE.
Remedy: ALTEC WILL PROVIDE INSTRUCTIONS TO DEALERS ON HOW TO INSPECT AND INSTALL THE NEW BRACKET FREE OF CHARGE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 15, 2010. OWNERS MAY CONTACT ALTEC AT 1-877-462-5832.
Additional Info: ALTEC SAFETY RECALL NO. CSN 536.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
NHTSA Source: http://www-odi.nhtsa.dot.gov/recalls/recallresults.cfm?start=1&SearchType=QuickSearch&rcl_ID=10V399000
   
Advertisement

Advertisement

Additional Altec Models

Recalls have also been issued under these model names:

Latest Safety Recalls

Select image for details, including additional styles.

 

Advertisement

Comments

Do you have comments or questions about this recall? Share them here.

Note: The recalling companies may not be monitoring these comments; they should be directed toward the public. Community Guidelines apply.

comments powered by Disqus
Back to Top



Sources may include: National Highway Traffic Safety Administration (NHTSA) and companies involved with this or a related recall.