ENC Axess Recalls
There has been 1 recall on Axess vehicles in recent years. The latest, dated 2014-03-12 and published by the NHTSA on 2014-04-02, was due to a problem with the engine. Approximately 561 vehicles were involved. Since 2006, Axess's have experienced approximately 2 recall(s) due to hazards with various components, including the tie rod assembly. See a list of recalls for your model year below.
IMPORTANT NOTE: Also check the list of Additional ENC Models to the right. At times, the manufacturer or the NHTSA may use slightly different model names, or group models together by series.

Do you work for ENC? Contact us to learn how you can control data, information and ads shown on this page.
Detailed Recall Information for ENC Axess
2014-03-12 | (Published by NHTSA on 2014-04-02) |
Recall Summary: | Eldorado National-California, Inc. (Eldorado) is recalling certain model year 2007-2014 Axess transit buses, 2008-2014 E-Z Rider II transit buses, and 2008-2012 XHF transit buses, equipped with certain Cummins Westport Model ISL G or ISX12 G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor. |
Hazard: | The improper operation of the sensor could induce elevated exhaust temperatures or flames from the exhaust pipe, increasing the risk of a vehicle fire or burn injury to a person near the exhaust pipe. |
Remedy: | Cummins Inc. and Cummins Wesport Inc. will notify owners, and authorized Cummins service facilities will upload a new ECM calibration, free of charge. The manufacturer has not yet provided a notification schedule. Owners may also contact Eldorado National-California, Inc. at 1-909-591-9557 or Cummins at 1-800-343-7357. |
Additional Info: | Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
NHTSA Source: | http://www-odi.nhtsa.dot.gov/recalls/recallresults.cfm?start=1&SearchType=QuickSearch&rcl_ID=14V108000 |
2005-03-09 | (Published by NHTSA on 2005-03-09) |
Recall Summary: | ON CERTAIN TRANSIT BUSES EQUIPPED WITH ARVINMERITOR URRESKO TIE ROD CLAMPS, HEAT TREATMENT OF CLAMPS CREATED A SURFACE HARDNESS THAT COULD LEAD TO A FRACTURE OF THE CLAMPS. |
Hazard: | IN THE EVENT OF A CRACK, THE CLAMPS COULD BREAK OFF AFFECTING TOE-IN AND ALIGNMENT. THE TIE ROD CAN COME LOOSE RESULTING IN STEERING LOSS AND A CRASH COULD OCCUR WITHOUT PRIOR WARNING. |
Remedy: | ARVINMERITOR IS CONDUCTING THE OWNER NOTIFICATION AND REMEDY FOR THIS CAMPAIGN. OWNERS MAY CONTACT ARVINMERITOR AT 1-866-668-7221 OR ELDORADO AT 1-909-591-9557. |
Additional Info: | CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV. |
NHTSA Source: | http://www-odi.nhtsa.dot.gov/recalls/recallresults.cfm?start=1&SearchType=QuickSearch&rcl_ID=05V080000 |
Additional ENC Models
Recalls have also been issued under these model names:
Sources may include: National Highway Traffic Safety Administration (NHTSA) and companies involved with this or a related recall.
Comments
Do you have comments or questions about this recall? Share them here.
Note: The recalling companies may not be monitoring these comments; they should be directed toward the public. Community Guidelines apply.